Ebikeling 48v 1200w Ebike Conversion Kit with Built-in Controller

The Ebikeling 48v 1200w Ebike Conversion Kit with Built-in Controller is available in 26″ / 700c wheel sizes and rear wheel fitment. It is an affordable way to turn your unloved bicycle into an e-bike. Utilizing tried and tested technology, the Ebikeling kit uses a brushless, direct-drive hub motor for maximum power and speed.

Compatibility

This conversion kit is suitable for many different types of bicycle, from mountain bike, folding bike through to recumbent bike. But you will need to check compatibility beforehand. Generally, older bikes or cheaper modern bikes are easy to convert. Where things get complicated is with modern, higher priced mountain or road bikes.

The Ebikeling 48v 1200w Ebike Conversion Kit with Built-in Controller is available in 26″ / 700c  wheel sizes, for bikes with quick-release dropouts – it is not suitable for thru-axles. Please check the width between the dropouts – most bicycles are 100mm front and 135mm rear, but this may vary depending on the age and style of the donor bike.

The pedal assist sensor is designed to work with a sealed, square-tapered bottom bracket. If your bicycle has a SRAM GXP, Powerspline, Shimano Hollowtech or Octalink BB, then you will need a different sensor.

Specifications (26″ / 700c):

• Recommended tire width: 1.75″ / 1.95″ / 2.125″
• Rim width: 24mm
• Rim diameter (outer): 572mm / 633mm
• Rim diameter (inner): 522mm / 583mm
• Spokes: 162mm / 192mm 12g carbon steel with copper nipples
• Rear dropout: 135mm
• Axle length: 209.5mm
• Motor wheel weight: 12.9lbs
• Max torque: 30Nm efficiency > 80%
• Motor rpm (nominal): 430
• Motor hub diameter: 242mm
• Motor magnets: 46
• Peak power: 1450w
• Operating mode: S1